Price List

Radio controlled helicopters, although often grouped with RC aircraft, are in a class of their own because of the vast differences in construction, aerodynamics and flight training. Hobbyists will often venture from planes, to jets and to helicopters as they enjoy the challenges, excitement and satisfaction of flying. Some radio-controlled helicopters have photo or video cameras installed and are used for aerial imaging or surveillance. Newer “3d” radio control helicopters can fly inverted with the advent of advanced swash heads, and servo linkage that enables the pilot to immediately reverse the pitch of the blades, creating a reverse in thrust. [edit] Flying bird models, or ornithopters Some RC models take their inspiration from nature. These may be gliders made to look like a real bird, but more often they actually fly by flapping wings. Spectators are often surprised to see that such a model can really fly, and real birds are often surprised by these unexpected visitors in their aerial domain. These factors as well as the added building challenge add to the enjoyment of flying bird models, though some ARF (almost-ready-to-fly) models are available. Flapping-wing models are also known as ornithopters, the technical name for an aircraft whose driving airfoils oscillate instead of rotate.

3D flight

3D flight is a type of flying in which model aircraft have a thrust-to-weight ratio of more than 1:1 (typically 1.5:1 or more), large control surfaces with extreme throws, and relatively low wing loadings. These elements allow for spectacular aerobatics such as hovering, ‘harriers’, torque rolling, blenders, rolling circles, and more, maneuvers that are performed below the stall speed of the model. The type of flying could be referred to as ‘on the prop’ as opposed to ‘on the wing’, which would describe more conventional flight patterns that make more use of the lifting surfaces of the plane. 3D has created a huge market for electric indoor ‘profile’ types similar to the Ikarus ‘Shockflyers’ designed to be able to fly inside a gym or outside in little wind. These generally make use of small brushless motors (often outrunners, but also geared inrunners) and lithium polymer batteries. There are also many larger 3D designs designed for two and four stroke glow engines, two stroke gas engines and large electric power systems.

Tags: Radio Controlled Helicopters

This entry was posted on Sunday, February 1st, 2009 at 10:44 am and is filed under Radio Controlled Helicopters. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.